Mycotoxins
BiopureTM 15-Acetyl Deoxynivalenol Solid Standards
SH-15-Acetyl DON Solid StandardMycotoxins Deoxynivalenol Trichotecenes B Calibrants
BiopureTM calibrants are high quality mycotoxin reference materials characterized by independent methods and accompanied by a certificate of analysis created in accordance with ISO Guide 31 and Eurachem guidelines.- Analyte: 15-Acetyl-Deoxynivalenol
- Technology/Application: Calibrants
- Formula: C17H22O7
BiopureTM13C labelled Fussarium toxins (NIV, DON, 3AcDON, T-2 Toxin, HT-2 Toxin, ZON) in acetonitrile
SH-13C Fusarium Toxins in ACNMycotoxins Deoxynivalenol T-2/HT-2 Trichotecenes A Trichotecenes B Zearalenone C13
13C isotope fully labelled mycotoxins are internal standards for mass spectrometry. All the carbon atoms in the molecules are replaced by the stable carbon isotype. With 13C fully labelled mycotoxin standards, recovery losses from sample preparation and matrix effects in the MS source can be eliminated.- Analyte: 13C Deoxynivalenol, 13C HT-2 Toxin, 13C T-2 Toxin, 13C Zearalenon, 13C 3-Acetyl-Deoxynivalenol, 13C Nivalenol
- Technology/Application: C13
- Solvent: Acetonitrile
BiopureTM13C labelled Fumonisins in acetonitrile/water
SH-13C FUM in ACN/H2OMycotoxins Fumonisines C13
13C isotope fully labelled mycotoxins are internal standards for mass spectrometry. All the carbon atoms in the molecules are replaced by the stable carbon isotype. With 13C fully labelled mycotoxin standards, recovery losses from sample preparation and matrix effects in the MS source can be eliminated.- Analyte: 13C Fumonisin B1, 13C Fumonisin B2, 13C Fumonisin B3
- Technology/Application: C13
- Quantity/Amount: 1.2 mL
BiopureTM 13C labelled Aflatoxins in acetonitrile
SH-13C Afla in ACNMycotoxins Aflatoxins C13
13C isotope fully labelled mycotoxins are internal standards for mass spectrometry. All the carbon atoms in the molecules are replaced by the stable carbon isotype. With 13C fully labelled mycotoxin standards, recovery losses from sample preparation and matrix effects in the MS source can be eliminated.- Analyte: 13C Aflatoxin B1, 13C Aflatoxin B2, 13C Aflatoxin G1, 13C Aflatoxin G2, 13C Aflatoxin M1
- Technology/Application: C13
- Quantity/Amount: 1.2 mL
BiopureTM EN 17641:2022 Reference Materials
SH-EN 17641 MixesMycotoxins Aflatoxins Deoxynivalenol Fumonisines T-2/HT-2 Trichotecenes A Trichotecenes B Zearalenone Calibrants
Biopure™ EN 17641 Reference Materials are mixes of “normal” (12C) or internal stable isotope-labeled (13C) reference materials specially designed for analytical laboratories that employ the EN 17641:2022 multi-mycotoxin method with LC-MS/MS. EN 17641:2022 was established by CEN (The European Committee for Standardization) in September 2022. It defines a multi-method that determines the following common mycotoxins by LC-MS/MS in foodstuffs:aflatoxins, deoxynivalenol, fumonisins, ochratoxin A, T-2 toxin, HT-2 toxin and zearalenone. It includes information about reagents, apparatus and equipment, method parameters as well as reference materials.- Analyte: Aflatoxin B1, Aflatoxin B2, Aflatoxin G1, Aflatoxin G2, Aflatoxin M1, Fumonisin B1, Fumonisin B2, Deoxynivalenol, 3-Acetyl-Deoxynivalenol, Nivalenol, HT-2 Toxin, T-2 Toxin, Zearalenone
- Technology/Application: Calibrants
- Quantity/Amount: 5 mL
AgraStrip® Zearalenone WATEX® Quantitative Tests
SH-AS-ZEN-WATEXLFD Quantitative
The AgraStrip® WATEX® test kits are ready-to-use lateral flow devices (LFD) for on-site testing. These allow a rapid analysis of a wide range of food and feed samples with an assay time of 3 minutes. The eco-friendly One for All WATEX extraction makes the analysis of multiple mycotoxins possible from only a single water-based sample extract. The test kits are available in a quantitative format and are used with the AgraVision™ reader, to provide objective results and secure a consistent results documentation.- Analyte: zearalenone
- Technology/Application: LFD
- Limit of detection: 30 ppb
AgraStrip® Total Aflatoxin Qualitative Tests
SH-AS-Afla-QualitativeLFD Qualitative
The AgraStrip® Aflatoxin Test is a one-step lateral flow immunochromatographic assay that determines the presence of total aflatoxin (B1, B2, G1 and G2) at a specific cutoff level in grains, cereals and other commodities. The AgraStrip® Aflatoxin Test has been validated for a variety of food products, such as corn, peanuts, rice, rice flour, wheat flour, semolina, almonds, among others.- Analyte: Total Aflatoxin
- Technology/Application: LFD
- Result type: Qualitative
AgraStrip® Fumonisin WATEX® Quantitative Tests
SH-AS-FUM-WATEXLFD
The AgraStrip® WATEX® test kits are ready-to-use lateral flow devices (LFD) for on-site testing. These allow a rapid analysis of a wide range of food and feed samples with an assay time of 3 minutes. The eco-friendly One for All WATEX extraction makes the analysis of multiple mycotoxins possible from only a single water-based sample extract. The test kits are available in a quantitative format and are used with the AgraVisionTM reader, to provide objective results and secure a consistent results documentation.- Analyte: fumonisin
- Technology/Application: LFD
- Limit of detection: 0.15 ppm
AgraQuant® Zearalenone Plus ELISA test
SH-AQ-ZearalenoneELISA Quantitative
AgraQuant® Zearalenone Plus test kits are accurate and reliable enzyme-linked immunosorbent assays (ELISA) in a quantitative format. Together with a StatFax® or BioTek® ELISA reader, results can be directly interpreted and continuously documented. These ELISA test kits are the ideal solution for a parallel measurement of multiple samples with incubation times of as low as 15 minutes for up to 42 samples. With the AgraQuant® ELISA, up to 6 mycotoxins can be analyzed from 1 extraction, substantially shortening overall time-to-result.- Analyte: Zearalenone
- Technology/Application: ELISA
- Limit of detection: 20 ppb